How to pair multiple Bluetooth devices?

1. Switch the keyboard to BT Mode. The mode switch is located on the backside of the keyboard.
   
2. Select which Bluetooth profile to connect to by pressing FN key and 1, 2, or 3 key together. For example, when pairing with BT profile 1, hold down FN+1. Once successfully connecting to BT profile 1, the BT1 Indicator Light will flash quickly as connection is establishing for 5 times then go away. During the first time connecting, the keyboard will default to Profile 1.
   
3. Put the keyboard in Pairing mode by holding down the FN key and DEL key for a few seconds until the BT Profile Indicator Light goes from a quick flash to a slow continuous flash. The keyboard is now in Pairing Mode.
   
   
4. For Mac, navigate to 'System Preferences' and select 'Keyboard'. Next, click on 'Set Up Bluetooth Keyboard'. For Windows, go to 'Bluetooth Settings' and select 'Add Bluetooth or other device'. Once the setup wizard finds 'IZO_KB', click on 'Pair'. Once pairing is successfully completed, the keyboard backlight will stop flashing. The keyboard is now ready for use.

The IZO Keyboard supports up to 3 Bluetooth devices simultaneously. Activate each connected BT device/profile with these key combinations: "FN+1", "FN+2", or "FN+3". The default profile is BT1, and in order to switch profiles, use key combinations of "FN+2", or "FN+3" with the previous set of instructions to pair with other devices.