Update Summary /
Fixing LED color bleed on Function keys when changing backlight setting
Users had reported that the backlight LED of the function key roll will have backlight light color bleed whenever modification had been done through the backlight setting.
The backlight control had been re-calibrated and optimized for not to show backlight color bleed.
Note / This update also included the missing keystroke fix, therefore you can execute this update alone if you have not updated the keyboard to firmware 1.1 yet.
Update procedure instruction /
01 / Download the Firmware update file that is attached at the bottom of this article. There are a direct executable update file and a compressed file. You might need to download the compressed file if you have an antivirus app installed on your PC/MAC since the executable file might be treated as a virus or file with a threat.
02 / Unzip the compressed file.03 / Connect your keyboard to the pc via the USB cable and turn the keyboard on to USB mode and your operating system type.
04 / Double click on the executable file AZIO_Cascade_Firmware_V1.2_UPDATE.exe
05 / The update file will open, and click on the "Start" button.
06 / The update file shall start the update, and your keyboard light will be off. Please do not disconnect or press any key on the keyboard during the update process. The update process shall take only about 10 seconds.
07 / Once the update is done, the updated app shall display "Update successfully" close the app by clicking on the right-hand top "X" button.
08 / Your update is DONE!
09 / If you go to the "Bluetooth & Device" section in your system setting, you shall see "AZIO Cascade V1.2" as the device name under the Input Device section. This is a second way to verify the update is done correctly. You might need to unplug and re-plug the USB cable to refresh the keyboard connection for the computer to restore the device name.
Note: After the change, only the USB device name will be updated to AZIO Cascade V1.2, but the Bluetooth device name will still show Cascade V1.0. Such representation is correct. The firmware update had been done through the USB, and we changed the USB device name with the current firmware version number to indicate the firmware status. The update will optimize the keyboard for both the USB and the Bluetooth modes.
Article is closed for comments.